PTFE Seat Ring Making Machine

Scope of application  :PTFE products

Feeding method  :Stainless steel segmented double barrels, moving mold feeding, time control feeding

Discharge method : The cylinder is ejected, and the blowing is the discharge or the cylinder pushes the material, which can be selected according to different products

control method

   The main cylinder is double-headed, the stroke is adjustable, and the auxiliary cylinder is imported buffer cylinder, which can be selected according to different products

Oil pump model

   Choose according to different products

Cylinder model  

0.1-3.5Mpa (configured according to product requirements)

Cylinder control  

Solenoid valve reversal, pressure reducing valve controls pressure

Position control  

Mechanical limit + proximity switch limit

cooling method

Oil-water heat exchange condenser

Rotation angle

60° -0-60° (The angle cannot be set, the angle needs to be determined)

Increase configuration advantages
Servo scraping system Use servo motor to simulate manual scraping back and forth to ensure accurate feeding
Quick mold clamping
Floating mold installation, without realigning the center, you can quickly change the mold. After switching to a quick fixture, the equipment can use 0.01mm high precision to match the mold to produce products without flash and burrs, which greatly reduces the cost and cost of later work.

Vibration feeding system Purpose: to realize fast feeding of narrow side diameter products
Automatic back pressure function Purpose: Solve the problem of inconsistency between the upper and lower pressures of high-level products, and reduce the taper problems that may occur in the finished product
Two-speed control system
The speed of the pressing oil cylinder can be adjusted in two stages to realize the fast operation of the oil cylinder when there is no load.

When pressing, the oil cylinder runs slowly to ensure that the ellipticity and density of the product meet the requirements.

Fully enclosed machine

The machine is fully enclosed, the equipment is more beautiful, and the secondary pollution of raw materials is reduced

Please contact us for more information.